A great result depends on products and on the order you use them in . Here is the routine we recommend for Thorgloss products.
Before you start
- Work on a cool surface in the shade - not in direct sunlight or on a hot body.
- Never let products dry on the surface.
- Always read the instructions on the label.
1. Tar, bitumen and grease
Start with the dirtiest areas - wheel arches, sills and the lower body. Spray TAR REMOVER , wait about 2 minutes until the tar starts to dissolve, then rinse.
2. Iron fallout and brake dust
Use RUST-REMOVER on wheels (on bodywork only if the label allows). Spray on cool surfaces, wait a few minutes and watch: the liquid changes colour on contact with metal particles. Rinse thoroughly.
3. Pre-wash
Spray PRE-WASH SHINE over the whole car and wait a few minutes without letting it dry. It loosens road film and insect residue, so you scrub less during the contact wash. Rinse.
4. Contact wash
Wash with CERAMIC SHAMPOO using a mitt or sponge, top to bottom, rinsing the mitt often. Finish with a clean-water rinse.
5. Protection and gloss
On the clean surface, apply CERAMIC PRO SHIELD sparingly, wait about 1 minute (do not let it dry) and rinse or buff as directed.
\n
6. Drying
Dry with the XL drying towel - its high absorbency helps avoid streaks and water spots.
7. Interior
Spray APC/INTERIOR APPLE on interior surfaces, leave for 2-5 minutes, scrub gently if needed and wipe with a damp cloth.
Everything in one box
For the whole routine at once, Thorgloss ULTIMATE 360° includes every product in this guide except the drying towel, and ELITE CARE covers cleaning, protection and drying for the body.